{"id":3493,"date":"2026-10-15T16:03:21","date_gmt":"2026-10-15T08:03:21","guid":{"rendered":"http:\/\/www.chillcarts.com\/blog\/?p=3493"},"modified":"2026-10-15T16:03:21","modified_gmt":"2026-10-15T08:03:21","slug":"can-thread-inserts-be-used-in-electrical-equipment-401c-93c542","status":"publish","type":"post","link":"http:\/\/www.chillcarts.com\/blog\/2026\/10\/15\/can-thread-inserts-be-used-in-electrical-equipment-401c-93c542\/","title":{"rendered":"Can thread inserts be used in electrical equipment?"},"content":{"rendered":"

Hey everyone, let\u2019s cut to the chase\u2014if you\u2019ve ever messed up a screw hole in electrical equipment, you know how much of a headache it is. Whether you\u2019re an OEM engineer slapping together control panels, a maintenance guy fixing a faulty circuit breaker on-site, or just someone who\u2019s spent way too much time troubleshooting loose screws, thread inserts are probably on your radar. But here\u2019s the big question most folks in the electrical space ask: Can thread inserts actually work in electrical gear, or are they just overkill for something that\u2019s supposed to be light, cheap, and non-conductive? As a thread insert supplier who\u2019s dealt with 100+ projects in the electrical and electronics space, let\u2019s break this down straight\u2014no jargon, no fluff. Thread Inserts<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get the basics right: What even are<\/em> thread inserts for electrical equipment? Let\u2019s not confuse this with the random wire nuts you twist together\u2014those are for connecting wires, not fasteners. The thread inserts we\u2019re talking about here are metal (usually stainless steel, brass, or sometimes aluminum) or even engineered polymer coils that you press, drill, or heat into a pre-tapped hole to reinforce it. If your original hole strips\u2014say you over-torqued a screw when mounting a relay, or the plastic housing was thin and couldn\u2019t hold tension anymore\u2014the insert creates a brand-new, strong, uniform thread that the screw can grip tight to.<\/p>\n

Now, why would you even consider using metal inserts in electrical stuff, which usually relies on plastic housings or non-conductive materials? Wait, a lot of people forget: not all electrical components need to be fully non-conductive. You have parts like chassis, mounting brackets, control enclosures, and even some internal brackets that are made of metal, sure, but the plastic enclosures for circuit breakers, LED drivers, or HVAC control boards? Those are the ones that get stressed. And here\u2019s the thing\u2014stripped holes in plastic enclosures aren\u2019t just annoying. If a screw comes loose from a stripped hole in a circuit breaker housing, that can lead to vibration, overheating, even electrical arcing in extreme cases. That\u2019s not a \u201cminor fix\u201d\u2014that\u2019s a safety issue.<\/p>\n

Let\u2019s talk about real-world examples, because I don\u2019t do hypotheticals. Last year, we worked with a mid-sized OEM that makes industrial HVAC control panels. They were using standard plastic snap-in holes for mounting their power relays, and within 6 months of launching their new line, they started getting warranty claims from contractors who said the relays were shifting loose, causing intermittent power cuts. They tried adding thicker plastic to the housing, but that upped their material costs by 12% and made the units bulkier, which was a no-go for their customers. We suggested using stainless steel wire thread inserts in the 4 mounting holes for each relay. The insert press-fits into the pre-tapped plastic hole, and the screw threads into the insert, not the flimsy plastic. The solution cut their warranty claims by 90% almost overnight, and their material costs only went up by 2% per unit\u2014way better than overdesigning the housing.<\/p>\n

Another big use case: on-site maintenance. I\u2019ve had countless electricians and facility managers hit me up for inserts to fix broken holes in old equipment. Like, a hospital had a bank of emergency generator control panels where the mounting holes had stripped from years of vibration and technicians over-torquing screws during repairs. Instead of replacing the entire $2k panel, they drilled out the old stripped holes, pressed in brass thread inserts, and were back up and running for a fraction of the cost. That\u2019s a huge win for downtime, especially in critical infrastructure like hospitals or data centers.<\/p>\n

But wait\u2014before you go drilling holes in your $100k control cabinet, let\u2019s talk about the gotchas, because not all thread inserts are created equal for electrical gear. First, conductivity. A lot of electrical engineers stress about metal inserts causing unwanted electrical connections, right? Fair point. So if you\u2019re using a conductive component that needs to be insulated from a metal chassis, you don\u2019t want a metal insert touching both the chassis and the screw. That\u2019s why we sell polymer thread inserts (usually nylon or PEEK, which is super high-temperature resistant) for those exact cases. They\u2019re non-conductive, so they keep the screw electrically isolated from the housing, but they still give you that same reinforcement against stripping, vibration, and torque. For example, if you\u2019re mounting a non-grounded plastic switch to a metal enclosure, a polymer insert ensures the switch doesn\u2019t accidentally make a ground connection it shouldn\u2019t.<\/p>\n

Then there\u2019s temperature. Electrical equipment can get hot\u2014especially power supplies, LED drivers, or industrial motors that run 24\/7. If you use a regular nylon insert in a housing that runs at 150C, it\u2019s gonna melt, right? So we recommend stainless steel or brass inserts for high-temp applications, because those can handle up to 400C, no problem. We also have inserts with a special coating that prevents galvanic corrosion\u2014super important if your equipment is going outdoors, or in a humid environment like a manufacturing plant with high moisture. Galvanic corrosion happens when two different metals touch in the presence of moisture, and it can eat through threads fast. That\u2019s a big one for outdoor security cameras or solar inverter enclosures.<\/p>\n

Another common question: Will adding a thread insert add too much bulk to small electronic components? Like, for a tiny PCB-mounted terminal block, do you really need an insert? Honestly, no. Inserts are more for structural parts\u2014chassis, enclosures, big connectors, heavy relays. For small PCB fasteners, there are other solutions like press-in threaded studs, which are a different type of insert, but that\u2019s a separate ballgame. If you\u2019re working with a component that\u2019s under, say, 50mm in size, you probably don\u2019t need an insert. But anything larger, or anything that\u2019s going to experience regular vibration (like equipment in a truck, or industrial machinery), inserts are a game-changer.<\/p>\n

Let\u2019s also address the elephant in the room: cost. I know what you\u2019re thinking\u2014\u201cWhy would I pay a few extra cents per unit for an insert when I can just use a thicker plastic housing?\u201d But let\u2019s do the math. If you\u2019re a small OEM that makes 10,000 units a year, a 2% cost increase is $2,000. But if you get 100 warranty claims a year, each costing $500 in parts and labor to fix, that\u2019s $50,000. That\u2019s a no-brainer. And for maintenance, replacing a $5 panel with an insert that costs $0.10 is way cheaper than replacing a $2,000 control unit. We\u2019ve had customers tell us they recouped the cost of inserts in less than a month from reduced warranty costs.<\/p>\n

Now, let\u2019s get into installation, because a lot of people think inserts are hard to use, but that\u2019s not true. The type of insert we use most for electrical applications is the wire coiled insert (sometimes called a Helicoil, though that\u2019s a brand name). Installation is super simple: you tap the hole, thread the insert onto a special installation tool, screw it into the hole until it\u2019s seated, then break off the tang at the top. It takes 30 seconds per hole, no special equipment beyond a basic tap set and the installation tool. For on-site repairs, we also sell self-tapping inserts that you can just twist into a stripped hole without tapping\u2014perfect for electricians who don\u2019t have a full toolbox with them. We\u2019ve had guys fix a stripped hole in a breaker panel in 2 minutes flat with a self-tapping insert.<\/p>\n

Wait, but what about safety? The whole point of electrical equipment is that it\u2019s safe to use, right? Inserts don\u2019t compromise that if you pick the right one. We work closely with UL and RoHS compliance people, so all our inserts are tested to meet the same safety standards as the equipment they go into. For example, our stainless steel inserts are tested for voltage resistance up to 1000V, so they won\u2019t conduct electricity where they shouldn\u2019t. Our polymer inserts are tested for flame resistance, so if there\u2019s a small electrical arc, they won\u2019t catch fire. That\u2019s a big deal for compliance\u2014you can\u2019t just use random inserts; they have to meet industry safety specs.<\/p>\n

I think one of the biggest misconceptions out there is that thread inserts are only for big, industrial stuff. No way\u2014we\u2019ve sold inserts to small startup companies making smart home thermostats, where the plastic housing was so thin that mounting the thermostat caused the holes to strip within a few months. They used our small PEEK inserts, and now their customer reviews say the thermostats stay mounted tight, no more falling off walls. That\u2019s a tiny application, but it makes a huge difference for customer satisfaction.<\/p>\n

So let\u2019s wrap this up. Can thread inserts be used in electrical equipment? Absolutely\u2014they\u2019re not just a nice-to-have, they\u2019re a solution to common, costly problems: stripped holes, vibration loosening screws, warranty claims, and downtime. The key is picking the right insert for the job: polymer inserts for non-conductive, high-temp applications, stainless steel or brass for heavy, structural parts, coated inserts for corrosion resistance, and self-tapping ones for on-site repairs. And if you\u2019re worried about bulk or cost, trust me\u2014the long-term savings and reliability are worth every penny.<\/p>\n

<\/p>\n

If you\u2019re dealing with stripped holes, high warranty costs, or loose fasteners in your electrical equipment, we can help you pick the right insert for your specific application. Whether you\u2019re an OEM designing a new line, or a maintenance team fixing an old panel, we\u2019ve got the inserts and the expertise to get the job done right. Hit us up to chat through your project\u2014no pressure, just straight talk about what will work for you.<\/p>\n

Bolts<\/a> References<\/p>\n

    \n
  1. UL Standard 1950 for Information Technology Equipment Safety, 3rd Edition<\/li>\n
  2. ISO 9001:2015 Quality Management System Requirements for Thread Insert Manufacturing<\/li>\n
  3. NEMA Standard ICS 2-2018 for Electrical Enclosure Construction and Reinforcement<\/li>\n<\/ol>\n
    \n

    Changzhou Unilee Fastening Technology Co., Ltd.<\/a>
    With abundant experience, we are one of the most professional thread inserts manufacturers and suppliers in China. Please feel free to buy premium thread inserts made in China here and get pricelist from our factory. All customized products are with high quality and competitive price.
    Address: Building 32, No.158, Jinchuang Road, Economic Development Zone, Changzhou City, Jiangsu Province
    E-mail: vitatree.cn@gmail.com
    WebSite:     https:\/\/www.unileefastener.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, let\u2019s cut to the chase\u2014if you\u2019ve ever messed up a screw hole in electrical … Can thread inserts be used in electrical equipment?<\/span>Read more<\/a><\/p>\n","protected":false},"author":26,"featured_media":3493,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3456],"class_list":["post-3493","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-thread-inserts-4091-93f96a"],"_links":{"self":[{"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/posts\/3493","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/users\/26"}],"replies":[{"embeddable":true,"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/comments?post=3493"}],"version-history":[{"count":0,"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/posts\/3493\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/posts\/3493"}],"wp:attachment":[{"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/media?parent=3493"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/categories?post=3493"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.chillcarts.com\/blog\/wp-json\/wp\/v2\/tags?post=3493"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}